What’s the default IP Address for my TP Link router.
The default IP Address is 192.168.0.1.
Is there a way to check the number of devices that are connected to my TP link network?
By Assessing the Network Map feature . It will show you the list of all the devices that are connected to the network.
Can TP-LINK powerline adapters work in unstable power line circuits?
Yes. The voltage range on which powerline adapters can work with is 100-240V, therefore its stability will not be affected by the general voltage fluctuation.
Is it possible for TP-LINK powerline adapters to work in different phases of three-phase circuit?
Yes, but it’s rate will be affected when crossing the phases. If you connect all circuit breakers to the main switch then Powerline adapters will be able to communicate across different circuits.
Can I login to my TP link modem router using the default IP Address?
Yes, in case you have not changed it you can always login to your TP link modem router using the default IP Address.
Why is my TP-Link not getting WAN parameters from my modem?
Precondition: Make sure the Internet works fine if you connect the computer directly to the modem, bypass the TP-Link router.
Problem Description: There will be no internet access after installing the TP-Link Router and no WAN IP Address on the router’s status page as well.
Note: If you are not sure how to log into the router’s web interface to check the WAN IP Address ,please click (https://tpliinkwifii.net/)
How to reset TP-Link router to factory defaults
Hard reset/ by pressing the RESET button. Power On the router, press and hold the WPS/RESET button (for more than 10 seconds) until the SYS LED becomes quick-flash from slow-flash. After that release the button and wait, the Router will reboot to its factory default settings.
What does the speed of Signal Rate mean?
It means the maximum wireless associated/link speed the router can provide. In simpler terms it refers to the internal WLAN connection speed between the computer and the router, not the internet speed as it is controlled by your ISP.
How do I know my actual internet speed?
There are various speed-test tools online .You can try with the most popular site: Speedtest® (http://speedtest.net) Although this test is Flash based. For a brief description of your speed you can look for an HTML5 speed test like: speedof.me.
Why do I get 1.2 Mbps download speed for instance, when the router says it is a 300 Mbps device?
As stated above, 300 Mbps refers to the WLAN internal link speed between the router and the computer, it is different from the actual internet speed. The internet speed is mainly decided by your Internet Service Provider.
Why am I getting 1MBytes/s download speed while my ISP provides a 8M network, for instancePlease be informed that here 8M means 8Mbps Mbps or Mb/s means megabits per second while MBps or MB/s means Megabytes per second, there are 8 bits per Byte. You need to clarify whether it is Mb or MB since they differ by a factor of 8.
My Fiber internet states the speed of 200Mbps but I can only get a maximum 90 Mbps with a TP-LINK router like 300Mbps TL-WR841ND, why?The actual internet speed depends on the amount that you have been paid for the speed, service connection type, the capability of the router, the current load on the provider’s network and the types of cables used.
Where can I find the firmware version of my TP-Link device?
Yes on the Management Page, you can find the firmware information. The build number indicates the released date, the first two or four digits representing the year, next two month and next two day.
How do I change the administrative username or password of TP-Link device for wifi routers?
You need to Go to the Account Management section. Enter the old login credential then set the new username and enter the new password twice (both case-sensitive). Click Save.
What are Parentals Controls?
The parent Controls allows you to restrict or block any websites from your network. You can also limit the access of the internet on any device for specific periods of time.